Call now to get tree assist such as tree cleanup, tree clearance, bush drop, shrub fall, stump lop and much more around USA:

Call us now

Call +1 (855) 280-15-30

Brian A, Mar 9,

Mar 09, First Cut off the head off each of the 4 trailing arm bushings: To remove the bushing follow this illustration (vise can be subbed for a C-clamp: To push the new bushing in again follow the illustration. Although not required, especially if you are using a strong vise; lube the outside of the bushing and the inside of the trailing arm hole, it. Aug 28, In this continuing suspension article, we will go over the steps involved with replacing the front suspension bushings on the BMW E30 3 Series models.

Keep in mind that this article is specific to my is; however, this article applies to all E30 models form to wheel hub and control arm/bushing on the driver side yesterday i got. Don't struggle with hammers and improper techniques, drive your bushings out easily with this control arm bushing remover and installer. From toBavarian Autosport was one of the premier vendors for BMW and MINI auto parts.

We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the Bav Auto Tools. Steering wheel wobble at specific speeds is the most common.

But bad control arm bushings can sometimes mask itself through warped rotors. Oftentimes when you brake at a specific highway speed, regardless of steering, the wheel shakes. This is due to bad ball joints on the control arm bushings. There are 2 ball joints on the E30 Front Control stumpcutter.buzzted Reading Time: 5 mins. Mar 15, On an E30, is it difficult to push a new rubber control arm bushing onto a new control arm? Is there a substitute for the BMW Special Lubricant/Glue (part no.

81 22 9 )?

Based on MJWeimer's suggestion, I used mineral spirit as a lubricant same chemical family as turpentine just without the nice smell.

I have a i convertible. Needless to say, I have never replaced the control arms myself and mine are worn again.